Filter by Category
- ABS Pump Repair 423
- ATE MK100 71
- ATE MK20 1
- ATE MK25 2
- ATE MK25 ESP 1
- ATE MK26 1
- ATE MK60 59
- ATE MK61 143
- ATE MK70 44
- Bosch 5.3 1
- Bosch 5.7 1
- Bosch 8.0 (ESP) 17
- Bosch 8.0 (No ESP) 14
- Bosch 9.0 66
- TRW 2
- Blue&Me / FRM Modules 12
- Gear Selector Repair 21
- Instrument Cluster Repair 17
- Transmission 167
Filter by Service
Transmission
DSG 7 DQ381 Bosch TCU Repair (0GC)
- Transmission Control Unit
- Fits Audi, Seat, Skoda, and VW models
- DQ381 / DQ500 (0GC / 0DL) TCU compatibility
- Restores optimal transmission functionality
- Check part numbers below
DSG 7 DQ200 TCU Repair (0AM927769D)
Common Faults:
- 005636/P1604 – Internal Control Module: Output Driver IC Error
- 16946/P0562/001378 – System Voltage too low
- Complete electronic failure in the gearbox.
- Internal leak: P17BF – Hydraulic pump system overload protection
- P189C/006300 – Function Restriction due to Insufficient Pressure Build-Up
- Short circuit in the transmission control unit and/or fuse blown
- More faults and error codes below
- Other faults on request
Mercedes-Benz 722.8 CVT TCU Repair VGS2 (A0034462410)
Common Faults:
- P1815 / 0717 – The RPM signal from component Y3 / 9b3 (primary speed sensor CVT) not available
- P1826 / 0722 – The RPM signal from component Y3 / 9b5 (output speed sensor CVT) not available
- P1939 / 0793 – The RPM signal from component Y3 / 9b4 (secondary speed sensor CVT) not available
- 0723 – The rpm signal from component Y3/9b5 CVT (output rpm sensor) is implausible
- 0739 – The rpm signal from component Y3/9b4 CVT – secondary rpm sensor is not available
- 0896 – impermissible adjustment of the step down ratio in the continuously variable automatic transmission (CVT)
- 0794 – Intermediate Input Shaft Speed Sensor Signal
- 1634 – Component Y3 / 9n1 (CVT) is defective or the power supply is faulty (under voltage)
- Transmission Visit workshop warning on dash
- Transmission can go straight into limp mode when selecting drive, slipping, loss of all drive and unable to select drive.
These symptoms usually start off intermittently and become more frequent until total failure.
DSG 7 DQ380 Bosch TCU Repair (0DE)
Common Faults:
- 10666 / P173500 – Position sensor for clutch 1, electric fault.
- 10668 / P173600 – Position sensor for clutch 2, electric fault.
- Vehicle will drive in limp mode, loss of odd or even gears.
- Other faults on request.
DSG 7 DQ200 TCU Repair (0AM927769K)
Common Faults:
- 005636/P1604 – Internal Control Module: Output Driver IC Error
- 16946/P0562/001378 – System Voltage too low
- Complete electronic failure in the gearbox.
- Internal leak: P17BF – Hydraulic pump system overload protection
- P189C/006300 – Function Restriction due to Insufficient Pressure Build-Up
- Short circuit in the transmission control unit and/or fuse blown
- More faults and error codes below
- Other faults on request
DSG 7 DQ200 TCU Repair (0AM927769G)
Common Faults:
- 005636/P1604 – Internal Control Module: Output Driver IC Error
- 16946/P0562/001378 – System Voltage too low
- Complete electronic failure in the gearbox.
- Internal leak: P17BF – Hydraulic pump system overload protection
- P189C/006300 – Function Restriction due to Insufficient Pressure Build-Up
- Short circuit in the transmission control unit and/or fuse blown
- More faults and error codes below
- Other faults on request
DSG 7 DQ500 Bosch TCU Repair (0DL)
- Fits Audi, Seat, Skoda, and VW models
- DQ381 / DQ500 (0GC / 0DL) TCU compatibility
- Restores optimal transmission functionality
DL501 S-Tronic DSG TCU Socket Repair (0B5)
Common Faults:
- Loose connections in the TCU socket.
- Corrosion of the TCU socket pins.
- Damage to the TCU socket pins.
- Communication errors between the TCU and transmission.
- Erratic gear shifts due to TCU issues.
- Complete loss of gear functionality.
DSG 6 DQ250 Mechatronic Repair (02E927770AQ / 02E325025AQ)
- 12-month warranty
- Complete Mechatronic Unit
- Part No: 02E 927 770 AQ / 02E 325 025 AQ
- Fits Audi, Seat, Skoda, and VW models
- Restores transmission functionality
DL501 DSG S-Tronic Valve Body Repair (0B5)
- 12-month warranty
- Valve Body
- Fits Audi & Porsche models
- Restores transmission fuctionality
- Check part numbers below
Mercedes-Benz 7G-Tronic 722.9 TCU Repair VGS2 (A0335457332)
Common Faults:
- P0717 2204 – The RPM signal from component Y3 / 8n1 turbine speed sensor (VGS) is unavailable
- P0718 2205 – The component Y3 / 8n1 (turbine speed sensor (VGS) is defective
- P2767 – The RPM signal from component Y3 / 8n2 Internal speed sensor (VGS) is unavailable
- P2768 – The component Y3 / 8n2 Internal speed sensor (VGS) is defective
- P0705 – Transmission range sensor fault
- Other faults on request
- Please see more possible faults below
Mercedes-Benz 9G-Tronic TCU Repair
- P073E00 – Reverse gear does not engage.
- P07B700 – The pressure sensor signal is invalid.
- Transmission will jerk once temperature is reached.
- The selector position automatically shifts from D to N.
- Other faults on request.
VW 7-Speed DQ381 DQ500 Bosch TCU Repair (0DE927711)
- Bosch Part No: 0260550086
- Fits Audi, Seat, Skoda, and VW models
- DQ381 / DQ500 (0GC / 0DL) TCU compatibility
- Restores optimal transmission functionality
Mercedes-Benz 722.8 CVT TCU Repair VGS (A1695451032)
Common Faults:
- P1815 / 0717 – The RPM signal from component Y3 / 9b3 (primary speed sensor CVT) not available
- P1826 / 0722 – The RPM signal from component Y3 / 9b5 (output speed sensor CVT) not available
- P1939 / 0793 – The RPM signal from component Y3 / 9b4 (secondary speed sensor CVT) not available
- 0723 – The rpm signal from component Y3/9b5 CVT (output rpm sensor) is implausible
- 0739 – The rpm signal from component Y3/9b4 CVT – secondary rpm sensor is not available
- 0896 – impermissible adjustment of the step down ratio in the continuously variable automatic transmission (CVT)
- 0794 – Intermediate Input Shaft Speed Sensor Signal
- 1634 – Component Y3 / 9n1 (CVT) is defective or the power supply is faulty (under voltage)
- Transmission Visit workshop warning on dash
- Transmission can go straight into limp mode when selecting drive, slipping, loss of all drive and unable to select drive.
These symptoms usually start off intermittently and become more frequent until total failure.
Audi S-Tronic TCU Repair DSG DL501 (0B5927256B / 0B5927156F)
- Part No: 0B5 927 256 B / 0B5 927 156 F
- Fits Audi models
- 0B5 TCU compatibility
- Restores transmission efficiency
Audi 7-Speed DQ381 DQ500 Bosch TCU Repair (0GC927711H)
- Bosch Part No: 0260550138
- Bosch Part No: 0260550150
- Fits Audi, Seat, Skoda, and VW models
- DQ381 / DQ500 (0GC / 0DL) TCU compatibility
- Restores optimal transmission functionality
Audi 7-Speed DQ381 DQ500 Bosch TCU Repair (0GC927711G)
- Bosch Part No: 0260550109
- Fits Audi, Seat, Skoda, and VW models
- DQ381 / DQ500 (0GC / 0DL) TCU compatibility
- Restores optimal transmission functionality
Multitronic Audi TCU Repair VL380 VL381 8-Speed (0AW927156K)
Common Faults:
- 17090, P0706 – Transmission Range Sensor (F125)
- 17101, P0717 – Transmission Input Speed Sensor (G182): No Signal
- 17105, P0721 – Transmission Output Speed Sensor (G195): Implausible Signal
- 17106, P0722 – Transmission Output Speed Sensor (G195): no signal
- 17137, P0753 – Shift Solenoid 1 (N88): Circuit Failure
- 18201, P1793 – Transmission Output Speed Sensor 2 (G196)
- 18226, P1818 – Pressure Control Valve 2 N216
- Other faults on request
- More faults and error codes below
VW 7-Speed DQ381 DQ500 Bosch TCU Repair (0GC927711H)
- Bosch Part No: 0260550138
- Bosch Part No: 0260550150
- Fits Audi, Seat, Skoda, and VW models
- DQ381 / DQ500 (0GC / 0DL) TCU compatibility
- Restores optimal transmission functionality
Audi S-Tronic TCU Repair DSG DL501 (0B5927256 / 0B5927156E)
- Part No: 0B5 927 256 / 0B5 927 156 E
- Fits Audi models
- 0B5 TCU compatibility
- Restores transmission efficiency
Mercedes-Benz 7G-Tronic 722.9 TCU VGS4 Replacement Unit (A0009017100)
Common Faults:
- RPM Sensor Faults
Mercedes-Benz 722.8 CVT TCU VGS2 Replacement Unit (A0034462410)
- 12-month warranty
- Plug and play, coded to your VIN
- Fits Mercedes A-Class and B-Class
- Sold on exchange basis
- Restores transmission functionality
Multitronic Audi TCU Repair VL380 VL381 (4G1927155F, 0AW927156K)
Common Faults:
- 17090, P0706 – Transmission Range Sensor (F125)
- 17101, P0717 – Transmission Input Speed Sensor (G182): No Signal
- 17105, P0721 – Transmission Output Speed Sensor (G195): Implausible Signal
- 17106, P0722 – Transmission Output Speed Sensor (G195): no signal
- 17137, P0753 – Shift Solenoid 1 (N88): Circuit Failure
- 18201, P1793 – Transmission Output Speed Sensor 2 (G196)
- 18226, P1818 – Pressure Control Valve 2 N216
- Other faults on request
- More faults and error codes below
DSG 6 DQ250 TCU Repair Service (02E927770AL / 02E325025AL)
- 24-month warranty
- Transmission Control Unit
- Part No: 02E 927 770 AL / 02E 325 025 AL
- Fits Audi, Seat, Skoda, and VW models
- Restores transmission functionality
ControlUnits is a leader in Transmission Mechatronics repair, a critical system combining mechanical and electronic components for optimal transmission performance. Whether it's erratic shifting, gear slipping, or software issues, our expert team addresses these challenges with precision. We utilize advanced diagnostics to ensure your vehicle's transmission operates smoothly, providing a reliable and efficient driving experience.
Why Choose Our Service:
- Specialized Expertise: Our technicians are adept in the complexities of Transmission Mechatronics systems.
- Advanced Diagnostic Tools: We use cutting-edge technology for pinpointing and resolving issues accurately.
- High-Quality Repairs: Each repair is conducted with meticulous care, ensuring long-term functionality.
- Competitive Pricing: Our services are priced to offer value without compromising on quality.
- Comprehensive Warranty: We back our repairs with a solid warranty, assuring you of our commitment to quality.
Our Process:
- In-Depth Diagnosis: We begin with a detailed analysis to identify specific issues with the Transmission Mechatronics.
- Clear and Fair Quoting: Our quotes are straightforward and transparent, ensuring no surprises.
- Skilled Repair Service: Our experienced technicians carefully repair or refurbish the system.
- Thorough Testing: Post-repair, the system undergoes extensive testing for guaranteed performance.
- Customer Approval: Your satisfaction is our priority; we consider the job complete when you are fully content with our service.
Choosing ControlUnits for your Transmission Mechatronics repair guarantees expert service and lasting results. Our dedication to customer satisfaction and excellence makes us a premier choice for automotive electronic repairs in the UK. Trust us to ensure your vehicle's transmission system functions with precision and efficiency. Reach out to us today for top-tier Transmission Mechatronics repair services.
ABS Pump Repair
Blue&Me / FRM
Gear Selector Repair
Inst. Cluster Repair
Transmission Repair