Filter by Category
- ABS Pump Repair 423
- ATE MK100 71
- ATE MK20 1
- ATE MK25 2
- ATE MK25 ESP 1
- ATE MK26 1
- ATE MK60 59
- ATE MK61 143
- ATE MK70 44
- Bosch 5.3 1
- Bosch 5.7 1
- Bosch 8.0 (ESP) 17
- Bosch 8.0 (No ESP) 14
- Bosch 9.0 66
- TRW 2
- Blue&Me / FRM Modules 12
- Gear Selector Repair 21
- Instrument Cluster Repair 17
- Transmission 167
Filter by Service
Control Unit Repair (TCU)
DSG 7 DQ381 Bosch TCU Repair (0GC)
- Transmission Control Unit
- Fits Audi, Seat, Skoda, and VW models
- DQ381 / DQ500 (0GC / 0DL) TCU compatibility
- Restores optimal transmission functionality
- Check part numbers below
DSG 7 DQ200 TCU Repair (0AM927769D)
Common Faults:
- 005636/P1604 – Internal Control Module: Output Driver IC Error
- 16946/P0562/001378 – System Voltage too low
- Complete electronic failure in the gearbox.
- Internal leak: P17BF – Hydraulic pump system overload protection
- P189C/006300 – Function Restriction due to Insufficient Pressure Build-Up
- Short circuit in the transmission control unit and/or fuse blown
- More faults and error codes below
- Other faults on request
Mercedes-Benz 722.8 CVT TCU Repair VGS2 (A0034462410)
Common Faults:
- P1815 / 0717 – The RPM signal from component Y3 / 9b3 (primary speed sensor CVT) not available
- P1826 / 0722 – The RPM signal from component Y3 / 9b5 (output speed sensor CVT) not available
- P1939 / 0793 – The RPM signal from component Y3 / 9b4 (secondary speed sensor CVT) not available
- 0723 – The rpm signal from component Y3/9b5 CVT (output rpm sensor) is implausible
- 0739 – The rpm signal from component Y3/9b4 CVT – secondary rpm sensor is not available
- 0896 – impermissible adjustment of the step down ratio in the continuously variable automatic transmission (CVT)
- 0794 – Intermediate Input Shaft Speed Sensor Signal
- 1634 – Component Y3 / 9n1 (CVT) is defective or the power supply is faulty (under voltage)
- Transmission Visit workshop warning on dash
- Transmission can go straight into limp mode when selecting drive, slipping, loss of all drive and unable to select drive.
These symptoms usually start off intermittently and become more frequent until total failure.
DSG 7 DQ380 Bosch TCU Repair (0DE)
Common Faults:
- 10666 / P173500 – Position sensor for clutch 1, electric fault.
- 10668 / P173600 – Position sensor for clutch 2, electric fault.
- Vehicle will drive in limp mode, loss of odd or even gears.
- Other faults on request.
DSG 7 DQ200 TCU Repair (0AM927769K)
Common Faults:
- 005636/P1604 – Internal Control Module: Output Driver IC Error
- 16946/P0562/001378 – System Voltage too low
- Complete electronic failure in the gearbox.
- Internal leak: P17BF – Hydraulic pump system overload protection
- P189C/006300 – Function Restriction due to Insufficient Pressure Build-Up
- Short circuit in the transmission control unit and/or fuse blown
- More faults and error codes below
- Other faults on request
DSG 7 DQ200 TCU Repair (0AM927769G)
Common Faults:
- 005636/P1604 – Internal Control Module: Output Driver IC Error
- 16946/P0562/001378 – System Voltage too low
- Complete electronic failure in the gearbox.
- Internal leak: P17BF – Hydraulic pump system overload protection
- P189C/006300 – Function Restriction due to Insufficient Pressure Build-Up
- Short circuit in the transmission control unit and/or fuse blown
- More faults and error codes below
- Other faults on request
DL501 S-Tronic DSG TCU Socket Repair (0B5)
Common Faults:
- Loose connections in the TCU socket.
- Corrosion of the TCU socket pins.
- Damage to the TCU socket pins.
- Communication errors between the TCU and transmission.
- Erratic gear shifts due to TCU issues.
- Complete loss of gear functionality.
Mercedes-Benz 7G-Tronic 722.9 TCU Repair VGS2 (A0335457332)
Common Faults:
- P0717 2204 – The RPM signal from component Y3 / 8n1 turbine speed sensor (VGS) is unavailable
- P0718 2205 – The component Y3 / 8n1 (turbine speed sensor (VGS) is defective
- P2767 – The RPM signal from component Y3 / 8n2 Internal speed sensor (VGS) is unavailable
- P2768 – The component Y3 / 8n2 Internal speed sensor (VGS) is defective
- P0705 – Transmission range sensor fault
- Other faults on request
- Please see more possible faults below
Mercedes-Benz 9G-Tronic TCU Repair
- P073E00 – Reverse gear does not engage.
- P07B700 – The pressure sensor signal is invalid.
- Transmission will jerk once temperature is reached.
- The selector position automatically shifts from D to N.
- Other faults on request.
VW 7-Speed DQ381 DQ500 Bosch TCU Repair (0DE927711)
- Bosch Part No: 0260550086
- Fits Audi, Seat, Skoda, and VW models
- DQ381 / DQ500 (0GC / 0DL) TCU compatibility
- Restores optimal transmission functionality
Mercedes-Benz 722.8 CVT TCU Repair VGS (A1695451032)
Common Faults:
- P1815 / 0717 – The RPM signal from component Y3 / 9b3 (primary speed sensor CVT) not available
- P1826 / 0722 – The RPM signal from component Y3 / 9b5 (output speed sensor CVT) not available
- P1939 / 0793 – The RPM signal from component Y3 / 9b4 (secondary speed sensor CVT) not available
- 0723 – The rpm signal from component Y3/9b5 CVT (output rpm sensor) is implausible
- 0739 – The rpm signal from component Y3/9b4 CVT – secondary rpm sensor is not available
- 0896 – impermissible adjustment of the step down ratio in the continuously variable automatic transmission (CVT)
- 0794 – Intermediate Input Shaft Speed Sensor Signal
- 1634 – Component Y3 / 9n1 (CVT) is defective or the power supply is faulty (under voltage)
- Transmission Visit workshop warning on dash
- Transmission can go straight into limp mode when selecting drive, slipping, loss of all drive and unable to select drive.
These symptoms usually start off intermittently and become more frequent until total failure.
Audi S-Tronic TCU Repair DSG DL501 (0B5927256B / 0B5927156F)
- Part No: 0B5 927 256 B / 0B5 927 156 F
- Fits Audi models
- 0B5 TCU compatibility
- Restores transmission efficiency
Audi 7-Speed DQ381 DQ500 Bosch TCU Repair (0GC927711H)
- Bosch Part No: 0260550138
- Bosch Part No: 0260550150
- Fits Audi, Seat, Skoda, and VW models
- DQ381 / DQ500 (0GC / 0DL) TCU compatibility
- Restores optimal transmission functionality
Audi 7-Speed DQ381 DQ500 Bosch TCU Repair (0GC927711G)
- Bosch Part No: 0260550109
- Fits Audi, Seat, Skoda, and VW models
- DQ381 / DQ500 (0GC / 0DL) TCU compatibility
- Restores optimal transmission functionality
Multitronic Audi TCU Repair VL380 VL381 8-Speed (0AW927156K)
Common Faults:
- 17090, P0706 – Transmission Range Sensor (F125)
- 17101, P0717 – Transmission Input Speed Sensor (G182): No Signal
- 17105, P0721 – Transmission Output Speed Sensor (G195): Implausible Signal
- 17106, P0722 – Transmission Output Speed Sensor (G195): no signal
- 17137, P0753 – Shift Solenoid 1 (N88): Circuit Failure
- 18201, P1793 – Transmission Output Speed Sensor 2 (G196)
- 18226, P1818 – Pressure Control Valve 2 N216
- Other faults on request
- More faults and error codes below
VW 7-Speed DQ381 DQ500 Bosch TCU Repair (0GC927711H)
- Bosch Part No: 0260550138
- Bosch Part No: 0260550150
- Fits Audi, Seat, Skoda, and VW models
- DQ381 / DQ500 (0GC / 0DL) TCU compatibility
- Restores optimal transmission functionality
Audi S-Tronic TCU Repair DSG DL501 (0B5927256 / 0B5927156E)
- Part No: 0B5 927 256 / 0B5 927 156 E
- Fits Audi models
- 0B5 TCU compatibility
- Restores transmission efficiency
Mercedes-Benz 7G-Tronic 722.9 TCU VGS4 Replacement Unit (A0009017100)
Common Faults:
- RPM Sensor Faults
Mercedes-Benz 722.8 CVT TCU VGS2 Replacement Unit (A0034462410)
- 12-month warranty
- Plug and play, coded to your VIN
- Fits Mercedes A-Class and B-Class
- Sold on exchange basis
- Restores transmission functionality
Multitronic Audi TCU Repair VL380 VL381 (4G1927155F, 0AW927156K)
Common Faults:
- 17090, P0706 – Transmission Range Sensor (F125)
- 17101, P0717 – Transmission Input Speed Sensor (G182): No Signal
- 17105, P0721 – Transmission Output Speed Sensor (G195): Implausible Signal
- 17106, P0722 – Transmission Output Speed Sensor (G195): no signal
- 17137, P0753 – Shift Solenoid 1 (N88): Circuit Failure
- 18201, P1793 – Transmission Output Speed Sensor 2 (G196)
- 18226, P1818 – Pressure Control Valve 2 N216
- Other faults on request
- More faults and error codes below
DSG 6 DQ250 TCU Repair Service (02E927770AL / 02E325025AL)
- 24-month warranty
- Transmission Control Unit
- Part No: 02E 927 770 AL / 02E 325 025 AL
- Fits Audi, Seat, Skoda, and VW models
- Restores transmission functionality
DSG 6 DQ250 TCU Repair Service (02E927770AE / 02E325025AE)
- 24-month warranty
- Transmission Control Unit
- Part No: 02E 927 770 AE / 02E 325 025 AE
- Fits Audi, Seat, Skoda, and VW models
- Restores transmission functionality
Mercedes-Benz 7G-Tronic 722.9 TCU Repair VGS3-S (A0034460610)
Common Faults:
- P0717 2204 – The RPM signal from component Y3 / 8n1 turbine speed sensor (VGS) is unavailable
- P0718 2205 – The component Y3 / 8n1 (turbine speed sensor (VGS) is defective
- P2767 – The RPM signal from component Y3 / 8n2 Internal speed sensor (VGS) is unavailable
- P2768 – The component Y3 / 8n2 Internal speed sensor (VGS) is defective
- P0705 – Transmission range sensor fault
- Other faults on request
- Please see more possible faults below
Skoda 7-Speed DQ381 DQ500 Bosch TCU Repair (0DE927711)
- Bosch Part No: 0260550086
- Fits Audi, Seat, Skoda, and VW models
- DQ381 / DQ500 (0GC / 0DL) TCU compatibility
- Restores optimal transmission functionality
At ControlUnits, our expertise in Transmission Control Unit (TCU) repair and TCU problem solving sets us apart, ensuring your vehicle operates at peak efficiency. Our comprehensive approach includes diagnostics, precision repairs, and tailored solutions to address a wide range of TCU problems, guaranteeing flawless performance. With a focus on enhanced gear shifts, fuel economy, and an overall superior driving experience, we customize our services to your vehicle's unique needs, making us the go-to specialists for TCU repair and maintenance.
Why Choose Us for TCU Repairs?
- Specialised Expertise: Our skilled technicians excel in TCU repair and solving TCU problems, offering unparalleled knowledge across different vehicle types.
- Advanced Technology: We use cutting-edge diagnostic tools and repair technologies for efficient and accurate TCU problem solving and repair services.
- Customised Solutions: Recognising the individuality of each vehicle, we provide personalised TCU repair services, directly addressing your specific TCU issues.
- Supreme Quality Components: For every repair, replacement, and fitting, we select only top-tier, durable parts, ensuring long-lasting performance and reliability.
- Unmatched Customer Satisfaction: We are committed to your satisfaction, offering transparent, comprehensive services to exceed your expectations at every turn.
Our TCU Repair Process:
- Thorough Diagnosis: We begin with a detailed diagnostic to accurately pinpoint TCU problems, setting the foundation for effective repair.
- Informed Consultation: Post-diagnosis, we outline the most effective repair or replacement strategy, tailored to your preferences and vehicle's needs.
- Precision Service: Our technicians apply specialised skills and tools for TCU repair, ensuring meticulous attention to detail in every service.
- Rigorous Testing: Following repair or fitting, we conduct extensive testing to confirm optimal TCU functionality, adhering to our strict quality standards.
- Continued Support: Enjoy ongoing support and guidance, keeping your vehicle in prime condition and ensuring your utmost satisfaction.
Solve Your TCU Problems Today
Opt for ControlUnits for top-tier TCU repair, replacement, and fitting services that promise unmatched transmission efficiency and performance. Our blend of technical expertise, advanced technology, and a dedication to customer satisfaction ensures your vehicle not only meets but exceeds performance expectations. Reach out today for a custom TCU repair solution that addresses your specific needs and elevates your driving experience.
ABS Pump Repair
Blue&Me / FRM
Gear Selector Repair
Inst. Cluster Repair
Transmission Repair